Tx/Rx System

Background Info.

There are many different options available for different tx/rx (tranceiver/receiver) systems that relay information between yourself and the quadcopter. Discussed below is one example of a relatively inexpensive system that is great value for money.

Channels

The number of channels on a system indicates how many features a system has. So for example a 2 channel system might have an option for throttle and steer only while a 9 channel system like discussed below will have many more options

 like pitch and yaw and trim etc. 

Mode

There are two different types of modes for tranceivers. Mode 1 has a the throttle on the right hand side of the receiver and mode 1 simply has it on the left.

Turnigy 9X (mode 2)

With v2 firmware update, correcting many flaws of the previous 9X, plus inbuilt 2.4Ghz (no daggy second antenna) this is a quality, reliable 2.4Ghz system suitable for beginners and pro pilots alike.

Number of Channnel: 8ch ppm/9ch pcm
Display: 128*64LCD
Support Type: Heli/Acro/Glid
Support user: 8Stick model: 4
Encoder type: ppm/pcm
Subtrim: Yes
Simulator Interface: Yes
Buzzer: Yes
Low Voltage Show: Yes
Required: Battery

Included:
Turnigy 9x 9Ch Transmitter
Turnigy RF9X-V2 module
Turnigy 9X8C-V2 8-channel receiver

Important.
The TURNIGY 9X has been reflashed with the new v2 firmware, fixing previous menu and mixing issues. This firmware flash is only available from our TURNIGY 9X system as we flash each unit in our office before it is shipped.
Purchases of any other rebranded version of the TURNIGY 9X will not have the latest firmware and patches (even the OEM factory does not have these updates).
NOTE: "SWITCH ERROR" means you have one of the switches in the wrong position when you turn the radio on. It is not a fault.